CART (0)

Your shopping cart is empty

View Cart
Close

Please select your country or region to be
directed to the appropriate Lesker site.

ALD-150LE

ALD-150LE™
Thermal ALD Designed for Advanced Research & Development Applications

The ALD-150LE™ Thin Film Deposition System from Kurt J. Lesker Company is engineered for Ultra High Purity (UHP) thermal Atomic Layer Deposition (ALD) processes. Designed for advanced research and development, this system supports deposition of critical materials for barrier films and devices with High Aspect Ratio (HAR) features.

Thermal Precursor Focusing Technology (PFT) Ultra High Purity (UHP) High Aspect Ratio (HAR) Variable Residence Mode (VRM)

Automate Your Lab.

Learn more about AI-Ready with eKLipse.

Atomic-Scale Precision for Complex 3D Geometry

Conformal Al2O3 film deposited in to trenches

Conformal Al2O3 film deposited into trenches of varying aspect ratios.
Image courtesy of Bangzhi Liu, Pennsylvania State University

Conformal HfO2 film over step

Conformal HfO2 film over step.
Image courtesy of Bangzhi Liu, Pennsylvania State University

Conformal Al2O3 film deposited in to trenches.
Image courtesy of Bangzhi Liu, Pennsylvania State University

Conformal HfO2 film over step.
Image courtesy of Bangzhi Liu, Pennsylvania State University

ALD-150LE Specifications

Specification Value
Substrate Size Up to 150mm
Substrate Loading Manual, Open Load
Substrate Temperature Up to 500°C
Delivery Line and Chamber Temperature Up to 250°C
ALD Process Modes Thermal only, Dynamic and Static Exposure for HAR, Variable Residence Mode (VRM)
Precursor Inlets to Chamber Two (2), standard on chamber, independently heated
Precursor Types Up to fourteen (14)
  • Vapor Draw
  • Flow Through, "Bubbler"
  • Ozone
  • Pulsed Gas
Dimensions: W x L X H 52" x 86" x 42"
*Options chosen may change dimensions
Power NA: 208-240V, 1Ph, 60Hz, 3 wire
Asia: 380-415V, 1Ph, 50Hz, 3 wire
EU: 380-415V, 1Ph, 50Hz, 3 wire
Safety/Certification CE, NRTL
Safety PLC circuit

Atomic Limits

The Atomic Limits ALD Database is a trusted, centralized hub for atomic layer deposition knowledge–connecting researchers and technologists with published ALD materials, precursors, and process insights.

Atomic Limits

This work is licensed under a Creative Commons Attribution 4.0 International License.
If you want to refer to this database, you can use the DOI: 10.6100/alddatabase

Standard Features Available on all ALD-150LE Systems

Patent Pending Ultra High Purity Conditions

Patented Ultra High Purity Conditions (UHP-C)

Our UHP-C technology eliminates background contaminants through advanced reactor design and material selection. This is essential for deposition of nitrides and elementals, where even trace impurities can compromise performance.

Open Load with Perpendicular Flow

Open Load with Perpendicular Flow

The clam-shell chamber allows easy substrate handling. Perpendicular precursor flow prevents back-streaming, maintaining UHP conditions, and ensuring uniform film growth across high aspect ratio (HAR) structures.

Temperature Control and Uniformity

Temperature Control and Uniformity

  • The ALD-150LE™ uses Aluminum block cladding with heater jackets for superior thermal conductance. Six independent heater zones from precursor to substrate ensure uniform temperature profiles, preventing condensation and enabling consistent film quality.
  • Delivery lines are independently controlled to 250°C
Two Independent Inlets to Chamber
Two Independent Inlets to Chamber

Two Independent Inlets to Chamber

  • Two (2) independently heated precursor inlets to the chamber for vapor-draw or flow-through sources
    • Allows separation of co-reactants
  • Four (4) source positions around reactor
eKLipse Controls Software

Controls

The KJLC eKLipse™ Real-Time Controls Platform facilitates precise and accurate deposition of aluminum JJs. Each custom-engineered system offers the following standard features:

  • Intuitive user interface
  • Remote support with email notification capabilities
  • Scalable and extensible recipe engine featuring import/export utilities
  • Comprehensive 'one button' operation for unattended, customer-defined process execution
  • Compatibility with over 125 industry-standard device interfaces, including pumps, valves, power supplies, gauges, metrology equipment, and more

Options for the ALD-150LE Systems

Precursor Delivery Options

Supports up to 12 precursors with two (2) independent injection ports and heating to 200°C. Compatible with:

  • Single and Multi (5) Vapor Draw Sources for high vapor pressure precursors
  • Flow-Through Sources (bubbler type) for low vapor pressure precursors, using inert carrier gas for enhanced vapor delivery
Precursor Delivery Options

Variable Residence Mode (VRM)

VRM uses a corrosive series closed-loop butterfly valve and CapMan gauge for precise pressure dosing, enabling tailored exposure profiles for HAR structures and sensitive materials like ferroelectric oxides.

Ozone Source

Ozone Source (O3)

Optional O3 precursor provides alternative oxidation pathways, reducing contamination risk from water-based processes. Includes concentration analyzer and destruct unit for safe operation.

Process Pumping

Process Pumping

  • PFPE-prepared wet pump (50cfm)
  • Ebara ESR20N dry pump (40-70cfm)
    • Variable speed with Eco-mode
  • Ebara EV-A10 dry pump (36cfm)
  • Foreline purge/vent protection
  • High-conductance particle filtration

Supports dry abatement and viscous flow isolation, essential for UHP environments.

Glovebox Integration
Glovebox Integration

Glovebox Integration

Chamber lid opens inside glovebox, enabling inert atmosphere processing for air sensitive materials and devices.

Technical Resources for our ALD Systems

Explore our library of technical articles and industry white papers to support your ALD process development and system selection.

Technical Posts

Process & Application Insights

In-depth technical posts covering ALD process fundamentals, film chemistry, system configurations, and real-world application examples.

Browse all technical posts →

Journal Articles

Research & Technical Articles

Peer-reviewed journal articles on ALD system performance, emerging materials, and industry benchmarks.

Browse all journal articles →

Global KJLC Systems Service and Support

The Process Equipment Division™ (PED) Global Service Department consists of dedicated, experienced personnel who strive to provide world class customer service.

Americas & Australia

Phone: +1 412 387 9128

E-mail: NAservice@lesker.com

Europe, Middle East, India, & Africa

Phone: +44 1424 458100

E-mail: EMEIAservice@lesker.com

Asia

Phone: +86 21 50115900

E-mail: ASIAservice@lesker.com

Ready to Advance Your Research?

Do you have any questions? Click below to get in contact with one of our many experienced team members.

Contact Us - ALD-150LE Thin Film Deposition System