Features
- Hollow drive
- 27 mm clear bore
- High torque
- No bellows or dynamic seals
- Bakeable to 250°C
- Zero-backlash under low load
The MD35LB is a higher torque version of the standard MD35 drive and has a much larger clear bore of 27mm. Whereas the standard MD35 has a fixed CF16 rear flange, the MD35LB has a CF38 flange to accommodate the larger through bore and the flange is also rotatable. As such this manipulator is ideal for applications requiring multiple services to be passed through the drive, to facilitate for example, addition motions, electrical connections for sample heating or measurement, pipes for cooling etc. The rotatable rear flange provides for greater flexibility when mounting additional devices to the rear of the drive in spatially constrained situations, as that device can be mounted in any angular orientation. The drives can be stacked to provide multiple co-axial driven shafts through a single CF38 port, and given that both the mounting and rear flanges are the same size, the drives can be stacked one atop another infinitely in principal (- limited only by the shaft diameters).
The usual range of drive options is available from manual actuation, through various pneumatic and motor driven configurations. In these configurations limit and home switches can also be provided including an ingenious 'over 360°' option, to get slightly more than one full rotation.
Specifications Table
| MagiDrive Body | MD35LB |
| System Mounting Flange | CF38, 70 mm (2.75" O.D.) |
| Rear Flange (Rotatable) | CF38, 70 mm (2.75" O.D.) |
| Construction | Machined from one piece 316L |
| Shaft Style | 30mm O.D. Tube |
| Breakaway-Away Torque | 6 Nm (4.43 lbf ft) |
| Maximum No-Load Spin Speed (Standard Bearings) | 500 rpm |
| Maximum Shaft Axial Thrust | 145 N (32.5 lbf) |
| Clear Bore | 27mm |
| Bakeout | 250°C |
