The MD40H is a medium torque, medium stiffness rotary drive. Configured with a hollow body the MD40H has a rear fixed CF16 flange enabling a component to pass through the center, such as UHV Design's cold lance, or a second MagiDrive rotary feedthrough.
The MD35LB is a higher torque version of the standard MD35 drive and has a much larger clear bore of 27mm. Whereas the standard MD35 has a fixed CF16 rear flange, the MD35LB has a CF38 flange to accommodate the larger through bore and the flange is also rotatable.
The MD63H MagiDrive provides 25 Nm torque rotation through a high-stiffness coupling. This rotary feedthrough is ideal for platen rotation or robot type applications. Importantly, the MD63H has an adjustable rear flange to enable rotation of position prior to fixing. Crucially, the 35mm hollow bore allows a component to easily pass through the centre. For example, this could be a second MagiDrive rotary feedthrough shaft or heater module.
The MD64LB is a larger version of the MD35LB drive and has a larger clear bore of 48.5mm. Whereas the standard MD64H has a fixed CF35 rear flange, the MD64LB has a CF64 rear flange to accommodate the larger through bore and the flange is also rotatable.
The MD100H is selected for demanding high torque and stiffness applications, such as indexing robots or rotating large loads. The MD100H has the largest clear bore in the range and a rear rotatable flange. This enables a component to pass through the center such as UHV Design's cold lance, or a second MagiDrive rotary feedthrough.
For a listing of Frequently Asked Questions (FAQs) about Manipulation & Motion please see this link: Manipulation & Motion FAQ.





