Recommended for rough and high vacuum environments.
- Can be used down to pressures of less than 1 x 10-9 torr
- Bakeable to 100° C
- Leak rate through the main valve seal is tested at less than <1 x 10-9 std cc/sec. with helium during manufacture
- Available with manual, pneumatic, and electromagnetic actuators
Electromagnetically actuated valves
- Feature a double-wound coil combined with an electronic switching circuit, ensuring low power consumption and operating temperature while prolonging cycle life
- Includes twin reed switch to indicate open or closed position of the valve
- Circuit is fused to protect against surges and transient low voltage spikes
- Sealed grease-free bellows minimizes valve maintenance and enables operational reliability to 500,000 cycles for the larger flange sizes (130,000 cycles for KF25 and smaller)
Specifications Table
| Pressure |
Torr 7.52×10-10 Torr mbar 1.00×10-9 mbar |
|---|---|
| Rates |
Leak Rate 1.00×10-9 mbar*L/s 7.52×10-10 Torr*L/s |
| Temperature |
Actuator 45.0 ºC 113 ºF Closed Bake 45.0 ºC 113 ºF Open Bake 45.0 ºC 113 ºF |
|
Shaft Seal Type |
Bellows
|
|
Actuator Type |
Electromagnetic
|
|
Normal Position |
Closed
|
|
Valve Body Material |
Aluminum
|
|
Valve Seal Material |
Fluorocarbon (FKM)
|
|
Poppet Material |
Fluorocarbon (FKM)
|
|
Shaft Seal |
Bellows
|
X CLOSE

