CF Flanged Solid Shaft
Designed to provide rotary motion under high vacuum, these Ferro-Magnetic Fluid Sealed feedthroughs have ConFlat® compatible (CF) mounting flanges. Normal helium leak detectors capable of detecting 1 x 10-11 std cc/sec of Helium flow detect no leakage for CF mounts under static and dynamic testing. Our CF flanged rotary motion feedthroughs routinely operate in the 10-7 Torr range and, when properly prepared and installed, may be used to mid 10-9 Torr using ConFlat compatible (CF) Mounting Flanges.
Baseplate Mount Solid Shaft
These Ferro-Magnetic Fluid sealed rotary feedthroughs are sealed to the baseplate by a fluorocarbon o-ring. The operator mounts these drives to the vacuum chamber by placing them in a suitable smooth-sided port in the chamber wall and using a capture nut. Some models are threaded only part way. They will accommodate various wall thicknesses when used with a sleeve or spacer over the unthreaded portion so that the nut compresses the o-ring.
Please refer to the technical notes about loading, temperature, and other relevant information before specifying a feedthrough.
O-Ring Flanged Solid Shaft
These Ferro-Magnetic Fluid sealed rotary drives are designed for high vacuum applications where the chamber port has a flat, polished outer surface suitable for seating an o-ring surrounding a hole through the vacuum wall. Each feedthrough has a fluorocarbon o-ring installed in the flange. These flanges do not correspond to standard vacuum industry flange systems; however, the dimension table provides the information needed to mate to the chamber. Alternatively, we can supply an adapter spool piece to mate any feedthrough to a vacuum flange.
Thread Mount Solid Shaft
These Ferro-Magnetic Fluids sealed rotary feedthroughs are sealed to a flat surface by a fluorocarbon o-ring. The operator mounts these drives to the vacuum chamber by screwing them into a corresponding threaded hole, or on some models by placing them in a suitable smooth-sided port in the chamber wall and using a capture nut. Some models are threaded only part way. They will accommodate various wall thicknesses when used with a sleeve or spacer over the unthreaded portion so that the nut compresses the o-ring.
Please refer to the technical notes about loading, temperature, and other relevant information before specifying a feedthrough.
Features
- A unique magnetic fluid (ferrofluid) is used in place of an o-ring seal around dynamic parts
- Fluid hermetically seals the shaft, making a liquid o-ring while a permanent magnet keeps the fluid in place
- Ferrofluid magnetically held in stages formed by grooves machined into either the shaft or pole pieces
- Very long life as compared to dynamic o-ring seals
- Low particulate generation for sensitive environments
Applications
- Rotary stages
- Barrels
- Platens
- Planetaries
- Web coater rollers used in thin film deposition and etching processes
Option 1: High Temperature Fluid
- Pending application detail and compatibly verification.
Option 2: Cantilevered Design
- Redesign to locate both bearings on the atmospheric side thus drastically limiting particulate generation.
- Torque rating will be lowered.
Option 3: Maintenance Alert
- Visual or digital signal to indicate when service of the unit is required.
Option 4: Complete Custom Unit
- Custom Body, Shaft Length, Shaft Size, and other mechanical changes possible upon request.
Ordering Table
| More Info |
Description | Mount Type | Mount Size | Shaft O.D. | Bolt Holes | Water Cooled | Face O-ring | Part Number | Price | Ready to Ship | Add To Cart |
|---|---|---|---|---|---|---|---|---|---|---|---|
| More Info |
Description | Mount Type | Mount Size | Shaft O.D. | Bolt Holes | Water Cooled | Face O-ring | Part Number | Price | Ready to Ship | Add To Cart |
|
F/T, |
Baseplate Mount Solid Shaft | 1" BP | 1/4" | — | — | O-V026 | KLFDBP02510-A | $789.00 |
|
||
|
F/T, |
Baseplate Mount Solid Shaft | 3/4" BP | 1/4" | — | — | O-V026 | KLFDBP02575-A | $858.00 |
|
||
|
F/T, |
Baseplate Mount Solid Shaft | 1" BP | 3/8" | — | — | O-V026 | KLFDBP03710-A | $825.00 |
|
||
|
F/T, |
Baseplate Mount Solid Shaft | 1.5" BP | 3/8" | — | — | O-V132 | KLFDBP03715-A | $922.00 |
|
||
|
F/T, |
CF Flanged Solid Shaft | DN16CF (1.33" OD) | 1/4" | — | No | — | KLFDCF025133-A | $922.00 |
|
||
|
F/T, |
CF Flanged Solid Shaft | DN35CF-DN40CF (2.75" OD) | 1/4" | — | No | — | KLFDCF025275-A | $922.00 |
|
||
|
ROTARY, |
CF Flanged Solid Shaft | DN35CF-DN40CF (2.75" OD) | 1/4" | — | Yes | — | KLFDCF025275W-A | $950.00 |
|
||
|
F/T, |
CF Flanged Solid Shaft | DN35CF-DN40CF (2.75" OD) | 3/8" | — | No | — | KLFDCF037275-A | $1,011.00 |
|
||
|
F/T, |
CF Flanged Solid Shaft | DN35CF-DN40CF (2.75" OD) | 3/8" | — | Yes | — | KLFDCF037275W-A | $1,067.00 |
|
||
|
F/T, |
CF Flanged Solid Shaft | DN35CF-DN40CF (2.75" OD) | 1/2" | — | No | — | KLFDCF050275-A | $1,854.00 |
|
||
|
F/T, |
O-Ring Flanged Solid Shaft | 6.00" ASA Flange OD | 1/2" |
(4) x 0.75" OD on 4.75" BC |
No | O-V234 | KLFDOF05060-A | $1,467.00 |
|
||
|
F/T, |
O-Ring Flanged Solid Shaft | 6.00" ASA Flange OD | 3/4" |
(4) x 0.75" OD on 4.75" BC |
No | O-V234 | KLFDOF07560-A | $2,200.00 |
|
||
|
F/T, |
Thread Mount Solid Shaft | 5/16-24 UNF-2A Thread | 3/16" | — | No | O-V012 | KLFDTM018516-A | $1,284.00 |
|
||
|
F/T, |
Thread Mount Solid Shaft | 7/16-20 UNF-2A Thread | 1/4" | — | No | O-V015 | KLFDTM025716-A | $1,040.00 |
|
||
|
F/T, |
Thread Mount Solid Shaft | 1-14 UNS-2A Thread | 1/2" | — | No | O-V128 | KLFDTM050114-A | $940.00 |
|
||
|
F/T, |
Thread Mount Solid Shaft | 1-14 UNS-2A Thread | 1/2" | — | Yes | O-V128 | KLFDTM050114W-A | $1,444.00 |
|
||
|
F/T, |
Thread Mount Solid Shaft | 1-14 UNS-2A Thread | 3/4" | — | No | O-V128 | KLFDTM075114-A | $1,378.00 |
|
||
|
F/T, |
Thread Mount Solid Shaft | 1-14 UNS-2A Thread | 3/4" | — | Yes | O-V128 | KLFDTM075114W-A | $1,578.00 |
|
