MKS® Granville-Phillips® 925 MicroPirani™ Vacuum Transducer
1.0x10-5 Torr to Atm pressure/vacuum gauges with MEMS-based MicroPirani vacuum sensors
The 925 MicroPirani vacuum transducer is a thermal conductivity vacuum gauge based on a unique, MEMS-based (Micro-Electro-Mechanical Systems) vacuum sensor. The 925 MicroPirani offers analog voltage output, digital interface and set point relays for process controlling.
Features
- Increased measurement range from 10-5 Torr to Atmosphere, two decades beyond a standard Pirani
- Analog output and digital communication
- Mountable in any orientation
- Three optional set point relays for process control
- Optional local display
Applications
The 925 MicroPirani vacuum gauge can be used in many different vacuum monitoring and control applications, such as semiconductor, analytical, and industrial coating (solar) and freeze drying:
- General vacuum pressure measurement
- Foreline and roughing pressure measurement
- Gas backfilling measurement and control
- Mass spectrometer control
- Activation of UHV gauges
- System process control (interlocks, valves, pumps)
- Control system pressure
The 925 MicroPirani vacuum gauge can be configured with other flanges and vacuum terminations, electrical connectors (Hirschmann, RJ45/FCC68), a UHV enclosure seal, and custom analog output voltages to emulate voltage outputs from a variety of other transducers for "plug and play" replacement of other vendors' gauges in OEM applications without changing system software.
Specifications Table
| Model | 925 MicroPirani |
|---|---|
|
Technology |
MEMS Pirani
|
| Measurements |
Torr Min: 1.00×10-5 Max: 760 mbar Min: 1.30×10-5 Max: 1013 |
| Temperature |
Operating 40.0 ºC 104 ºF Storage 40.0 ºC 104 ºF Bakeout 85.0 ºC 185 ºF |
| Materials Exposed to Vacuum |
304 stainless steel Gold Low out gassing epoxy resin Silicon Silicon Dioxide Silicon Nitride Viton® |
| Connectors |
15 Pin Sub D Male 9 pin Sub D Male |
|
Typical Accuracy |
±10% of reading (5.00×10-4 to 1.00×10-3 Torr) ±5% of reading (1.00×10-3 to 100 Torr) ±25% of reading (100 Torr to atm) |
|
Accuracy Range |
1 to 10%
|
|
Display Type |
Digital
|
|
Set-Point Relays |
0 - 3 |
|
Relay Response |
1 A @ 30VAC/DC resistive
N/A |
|
Analog Output |
1 to 9 VDC
|
|
Recommended Mounting Orientation |
Any
|
|
Input Power |
9 to 30 VDC
< 1.5 watts max |
|
Communications (Standard) |
Analog
RS232 RS485 |
|
Communications (Optional) |
N/A
|
|
Compliance and Standards |
EMC Directive 2004/108/EEC
|
|
Integrated Electronics |
Yes
|
Configuration Options
This chart is to help you review all the available options for the MKS Granville-Phillips 925 MicroPirani Vacuum Transducer. Please see below for an interactive product builder to assemble the options into a part number ready for order.
Ordering Code Example:925-12034
| Series Options | Code | Configuration |
| MicroPirani | 925 | 925 |
| Flange Options | Code | Configuration |
| KF16 | 1 | 1 |
| KF25 | 2 | |
| 1/8" NPT-M | 3 | |
| VCR4 | 4 | |
| VCR8 | 5 | |
| KF16 Extended | 8 | |
| Interface Options | Code | Configuration |
| RS232 / Analog | 1 | 2 |
| RS485 / Analog | 2 | |
| EtherCAT / Analog | 7 | |
| Analog Out Options | Code | Configuration |
| Standard MKS | 0 | 0 |
| Connector / Relays Options | Code | Configuration |
| SUBD 9 Pin male / 1 relay set point (925C compatible) | 1 | 3 |
| SUBD 15 Pin male / no relay | 2 | |
| SUBD 15 Pin male / 3 relays | 3 | |
| SUBD 15 Pin male / 3 relays / Dual Analog Output | 5 | |
| Display / Sealing Options | Code | Configuration |
| Standard / Viton sealing / No display | 0 | 4 |
| Standard / Viton sealing / With display | 4 |
925 Micro Pirani Vacuum Transducer Pin-outs
| Pin | RS232/485 9 pin Sub-D | RS232/485 15 pin Sub-D | EtherCAT 15 pin Sub-D | RJ45 EtherCAT IN/OUT |
| 1 | Relay Normally Open | RS485 (-) / RS232 transmit | NC | TX+ |
| 2 | Relay Normally Closed | RS485 (+) / RS232 receive | NC | TX- |
| 3 | Power (+) (9-30 VDC) | Power (+) | Input Power (+) 9 to 24 VDC | RX+ |
| 4 | Power Return (-) | Power (-) | Power Return - | NC |
| 5 | Analog Output (+) | Analog Output (+) abs. | Signal Output + | NC |
| 6 | Relay Common | Analog Output (-) | Signal Common | RX- |
| 7 | RS485 (-) / RS232 Transmit | Relay #1 NO | NC | NC |
| 8 | Analog Output | Relay #1 Common | NC | NC |
| 9 | RS485 (+) / RS232 Receive | Relay #1 | NC | NC |
| 10 | - | Relay #2 NC | NC | - |
| 11 | - | Relay #2 Common | NC | - |
| 12 | - | Relay #2 NO | NC | - |
| 13 | - | Relay #3 NC (or analog output diff) | NC | - |
| 14 | - | Relay #3 Common | NC | - |
| 15 | - | Relay #3 NO | Chassis Ground | - |
Start Your Configuration
Ordering Table
| More Info |
Description | Technology | Display Type | Set-Point Relays | Connector Type | Flange | Communications (Standard) | Units | Set-Point Relays |
|
Part Number | Price | Ready to Ship | Add To Cart | Accessories | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| More Info |
Description | Technology | Display Type | Set-Point Relays | Connector Type | Flange | Communications (Standard) | Units | Set-Point Relays |
|
Part Number | Price | Ready to Ship | Add To Cart | Accessories | |||
|
GAUGE, |
MEMS Pirani | - | 1 | 9 pin Sub D Male | KF16 | Analog,RS232 | - | Yes |
|
|
$705.00 |
|
|
|||||
|
GAUGE, |
MEMS Pirani | Digital | 1 | 9 pin Sub D Male | KF16 | Analog,RS232 |
Pa Torr mbar |
Yes |
|
|
$937.00 |
|
— | |||||
|
GAUGE, |
MEMS Pirani | - | 1 | 15 Pin Sub D Male | KF16 | Analog,RS232 |
Pa Torr mbar |
Yes |
|
|
$678.00 |
|
— | |||||
|
GAUGE, |
MEMS Pirani | Digital | 3 | 15 Pin Sub D Male | KF16 | Analog,RS232 |
Pa Torr mbar |
Yes |
|
|
$965.00 |
|
— | |||||
|
GAUGE, |
MEMS Pirani | Digital | 0 | 15 Pin Sub D Male | KF16 | Analog,RS485 | - | - |
|
|
$869.00 |
|
|
|||||
|
GAUGE, |
MEMS Pirani | - | 3 | 15 Pin Sub D Male | KF16 | Analog,RS485 |
Pa Torr mbar |
Yes |
|
|
$737.00 |
|
— | |||||
|
GAUGE, |
MEMS Pirani | - | 0 | 15 Pin Sub D Male | KF25 | Analog,RS232 | - | - |
|
|
$692.00 |
|
— | |||||
|
GAUGE, |
MEMS Pirani | Digital | 0 | 15 Pin Sub D Male | KF25 | Analog,RS232 | - | - |
|
|
$921.00 |
|
— | |||||
|
GAUGE, |
MEMS Pirani | - | 3 | 15 Pin Sub D Male | KF25 | Analog,RS232 | - | Yes |
|
|
$750.00 |
|
|
|||||
|
GAUGE, |
MEMS Pirani | Digital | 3 | 15 Pin Sub D Male | KF25 | Analog,RS232 |
Pa Torr mbar |
Yes |
|
|
$982.00 |
|
|
|||||
|
GAUGE, |
MEMS Pirani | - | 1 | 9 pin Sub D Male | 1/8" NPT | Analog,RS232 | - | Yes |
|
|
$729.00 |
|
|
|||||
Accessories Table
| More Info |
Description | Accessory Type | Part Number | Price | Ready to Ship | Add Item |
|---|---|---|---|---|---|---|
| More Info |
Description | Accessory Type | Part Number | Price | Ready to Ship | Add Item |
| PDR900 to 9 Pin RS232, 10ft (3m) |
|
|
||||
| PDR900 to 15 Pin RS232, 10ft (3m) |
|
|
||||
| PDR900 to 15 Pin RS485, 10ft (3m) |
|
|
||||
| Serial Communication Adaptor, 15 Pin to USB, RS232 or RS485 Communications for 900 Series MKS Transducers |
|
|
||||
| MKS 925, KF16 |
|
|
||||
| MKS 925, KF25 |
|
|
||||
| MKS 925, 1/8" NPT-M, 1/2" Tube |
|
|
||||
| MKS 925, VCR4 |
|
|
||||
| MKS 925, VCR8 |
|
|
||||
| MKS 925, CF 1.33 |
|
|
||||
| MKS 925, KF16 Extended |
|
|
||||
| PDR900 Single Channel Controller, RS232/RS485, EU power Supply |
|
|
||||
| PDR900 Single Channel Controller, RS232/RS485, UK power Supply |
|
|
||||
| PDR900 Single Channel Controller, RS232/RS485, US power Supply |
|
|
||||
| Aluminum Clamp, DN16 ISO-KF Flange |
|
|
||||
| Viton® Centering Ring for DN16 ISO-KF Flange |
|
|
||||
| 9 Pin AC Power Supply Adapter for MKS 900 series Vacuum Transducer Gauges with Integrated Display, 24VDC |
|
|
